Rated voltage: The specific value is not directly given, but the general relay will have different rated voltage according to the application scenario.
Current rating: Again not given directly, but the REM615 is capable of handling a wide range of currents, such as 100-400A.
Rated frequency: The specific value is not mentioned, but usually matches the standard frequency of the power system.
Operating temperature: Operating temperature range is -20°C to +50°C, storage temperature range is -40°C to +70°C.
Ac/DC power supply: The input voltage range of the REM615 is 12-48VDC, indicating that it uses DC power.
Rated voltage: The specific parameters are not directly given, but according to similar products, it may cover a variety of voltage levels, need to refer to the specific model or data table.
Rated current: Again, specific parameters are not given directly and may vary depending on the model.
Rated frequency: Not given directly, but usually matches the standard frequency of the power system, such as 50Hz or 60Hz.
Operating temperature: In the range of -20°C to +50°C (according to some information), which may vary depending on the model or environmental requirements.
Ac/DC power supply: The input voltage range is usually 12-48VDC (according to some sources) for power supply.
specification
IEC61850 communication protocol support: This is an international standard widely used in substation automation for efficient communication between equipment.
argument
Voltage: 24V (according to some information)
Current: 100-400A (according to some information)
Rated frequency: User can choose 50/60 Hz
specification
Protection functions: including three-phase thermal overload protection, three-phase overcurrent protection, three-phase short-circuit protection, non-directional grounding fault protection, three-phase unbalance protection, reverse phase protection, etc
Communication protocols: Support communication protocols such as SPA bus, IEC 60870-5-103 and Modbus (RTU and ASCII)
Size and weight
Size: The specific size is not directly given, but depending on the type of relay, it is generally more compact and suitable for a variety of installation environments.
Weight: Approx. 2KG (according to some information)
REM610 parameters may include electrical parameters such as voltage and current, as well as Settings for protection functions. Specific parameters such as voltage 24V, current range 100-400A (these parameters may vary by product model and configuration).
specification
The REM610 is a multifunctional protective relay based on a microprocessor environment with a self-monitoring system that continuously monitors the operation of the relay.
It provides a series of integrated protection functions, such as three-phase thermal overload protection, three-phase overcurrent protection, three-phase short-circuit protection, etc.
argument
Control mode: PID control, fuzzy control, adaptive control
Input signal: analog (0-10V, 4-20mA), digital (ON/OFF)
Output signal: analog (0-10V, 4-20mA), digital (ON/OFF)
Control accuracy: ±0.1%FS
Communication interface: RS485, Modbus, Profibus
Operating temperature: -10℃~+55℃
Supply voltage: AC220V/DC24V
Voltage range: 0 ~ 5V, 1 ~ 5V (load resistance ≥200KΩ)
specification
Type: Universal controller or servo drive module
Design: Modular design can be flexibly expanded and applied to various industrial control fields
Features: Programmable, high precision, high reliability
argument
Processor: 32-bit RISC processor up to 200 MHz.
I/O points: up to 256 points.
Communication interface: Support RS232, RS485, Ethernet and other interfaces.
Power supply voltage: 24V DC (Another source mentions an input voltage of -0.6V DC, which may be an application-specific or configuration voltage rather than a standard power supply voltage).
Power consumption: 20W.
Output current: Max. 10A.
Efficiency: greater than 90%.
specification
Operating temperature: -25°C to +70°C (some sources mention -20°C to +50°C, which may be the operating temperature range under specific conditions).
Storage temperature: -40°C to +85°C.
Protection grade: IP67, indicating that it has good dust and water resistance.
argument
Voltage: 24V
Current: 100-400A
Features:
The terminal is under test and the function is blocking the HMI input signal
Three-phase trip signal output, used to command trigger the circuit breaker or send a signal
In automatic recovery system, the circuit breaker trips when the three-phase voltage is lost for a long time
The voltage measuring element continuously measures three voltages to ground, filters and compares them
specification
Weight: 2KG
Packing: good
Delivery time: Stock
Logistics: SF Express
Minimum package number: 1
argument
Rated current: According to different data, the rated current is different, may be 20A, may also be 100-400A. Please note that this may refer to different configurations or versions.
Rated voltage: 240V AC, but it is also mentioned that the input voltage range is 12-48VDC.
Output voltage: 5VDC (within the input voltage range).
Output current: Max. 10A.
Accuracy: ±0.5%.
Operating temperature range: -25°C to +55°C, or -20°C to +70°C.
Storage temperature range: -40°C to +70°C.
argument
Payload: between 150 and 500kg (up to 650kg with “no wrist”).
Maximum reach distance: 2.55~3.5m.
Protection Class: The cast Expert is rated IP 67 and can be steam-cleaned, making it ideal for harsh production environments.
Power supply: DC9-36V wide redundant dual power supply, DC1500V power isolation, reverse protection.
Communication rate: Supports a variety of communication rates, including 9.6kBit/s, 19.2 kBit/s, 45.45kBit/s, 93.75kBit/s, 187.5kBit/s, 500kBit/s, 1.5MBit/s, 6MBit/s, and 12MBit/s.
