Parameters and specifications
Model: DSQC679 3HAC028357-001
Brand: ABB
Type: Robot demonstrator
Applicable robot series: IRC5 series
Main functions: Programming and controlling ABB robotic systems
Compatible communication protocols: A variety of different communication protocols and interface standards facilitate communication and data exchange with industrial automation equipment and sensors
Parameters and specifications
Input scores: There are usually multiple numeric input channels, but the exact number may vary by model or version. Some data is shown as 20 numeric inputs, but others are shown as 8.
Input type: digital input, suitable for switch state, sensor state, etc.
Voltage range: 24V direct current (DC)
Consumption: Max. 2.5W.
Operating temperature: -20°C to 60°C.
Storage temperature: -40°C to 85°C.
Humidity: 5% to 95% (non-condensing).
Protection level: IP67, but some data show IP20, which may vary according to different models or application scenarios.
Isolation voltage: 250V RMS.
Surge voltage: 4kV.
Noise suppression: 500V/μs.
Parameters and specifications
Working voltage: DC 24V
Working current: ≤100mA
Number of input interfaces: 8 digits input
Number of output interfaces (possible) : Some information indicates that there are 4 digital outputs, but please note that this is not standard on all models, as specified in the product manual.
Communication interface: May be equipped with a communication interface, such as Modbus, Profibus, etc., to transmit input data to a monitoring system, PLC or other control device.
Size and weight
Dimensions: The overall dimensions are approximately 167mm x 94mm x 67mm
Parameters and specifications
Main system CPU: Industrial Cortex-A8 embedded microprocessor, 720MHz
RAM: 512MB DDR2 SDRAM
Flash: 1GB NAND Flash
USB: High-speed USB2.0 Host, support SD memory card expansion
Network interface: LAN 10/100/1000Mbps adaptive, support IEEE1588 precision clock protocol
Isolation protection: 15KV air discharge and 8KV contact discharge protection
Serial interface: RS232/RS485, 15KV ESD protection
CAN interface: 2.5KV optical insulation CAN2.0A/B compatible
Display interface: Standard VGA interface, resolution up to 1280×854 (WXGA)
Digital input/output: dry node and wet node support, relay output, Type C relay
Analog input/output: 12-bit single-ended input (analog input), 16-bit output (analog output)
Output voltage: 24VDC (according to some search results)
Operating temperature range: -40℃ ~ +85℃ (according to some search results)
Electrical safety: in accordance with UL508, IEC/EN 61131-2 standards, hazard classification position in accordance with UL/CSA 60079-15
Size and weight
Size: Net length 127.5 mm, net height 185 mm, net width 59 mm
Weight: Net weight 0.62 kg
Parameters and specifications
Processor: 32-bit RISC processor
Main frequency: up to 200 MHz
Power supply voltage: 24V DC (according to multiple information in search results)
Power consumption: 20W (according to one search result), but another mentions 120W, which may refer to a different model or configuration.
Operating temperature: -25°C to +70°C (according to one search result), but another search result mentions -10 °C to +50 °C, which may be due to differences between different versions or application environments.
Storage temperature: -40°C to +85°C
Communication interface: RS232, RS485, Ethernet
I/O points: up to 256 points
Protection level: IP67
Size and weight
Dimensions: 225 mm x 165 mm x 80 mm
Weight: 2.5kg
Parameters and specifications
Rated excitation current: 10 ADC
Rated voltage: 350 VDC
Processor: 32-bit RISC processor up to 200 MHz
I/O points: up to 256 points
Communication interface: Support RS232, RS485, Ethernet and other interfaces
Power supply voltage: 24V DC
Power consumption: 20W
Operating temperature range:
-25°C to +70°C (some data shows -20°C to +50°C)
Storage temperature: -40°C to +85°C
Size and weight
Size:
Approximately 225 mm x 165 mm x 80 mm (one way to say it)
230mm x 140mm x 200mm (another word)
170mm x 105mm x 32mm
Weight:
About 2.5 kg (one way to say it)
15 kg
About 120g
Parameters and specifications
Model: REF615 HBFEAEAGNDA1ABA1XG
Brand: ABB
Voltage: 24V (according to one of the search results)
Weight: 2KG (again according to one of the search results)
Application fields: Widely used in power, water conservancy, transportation, petroleum, chemical, coal, power supply bureau distribution network, data center, shopping malls, schools, hospitals, new energy and other industries
Parameters and specifications
Operating voltage: 24V DC, it is also said that the input voltage range is 12-48VDC, and the output voltage range is 5VDC, but this statement may be related to the specific application scenario.
Power: 5W.
Temperature range: -40 ° C to 85 ° C, indicating that the module can work normally in a wide temperature range.
Protection rating: IP65, indicating that the module has a high degree of dust and water resistance.
Current: It is said that the current is 100-400A, but considering that this is a voltage measurement module, this current range may be related to the power supply or load of the module, rather than the current parameters of the module itself.
Size and weight
Size: Some say it is 10cm x 10cm x 10cm, another say is 170mm x 105mm x 32mm, and the weight is about 120g. However, there are also claims that the weight is 0.5kg or 2KG.
Parameters and specifications
Model: REF615C-D
Brand: ABB (sometimes referred to as GE, but according to most information, this is an ABB product)
Applications: Usually used in power systems, including power substations, power distribution, power quality monitoring, motor protection and equipment protection.
Functions: With current and voltage monitoring, overcurrent and overvoltage protection, fault detection, automatic reclosing and communication interface functions.
Communication protocols: Support IEC 61850, Modbus and other communication protocols, easy to communicate with other devices and monitoring systems.
Parameters and specifications
Bus consumption current: 80mA
Total power consumption: 3W
Number of input points: 10
Rated voltage: 24V DC
Continuous allowable voltage: 30V DC
Surge voltage: 35V DC, 0.5s
Logic “0” voltage range: 5V DC, 1mA
Logic “1” voltage range: 15V DC, 1mA
Input delay: 4.5ms
Signal input type: PNP/NPN photoelectric isolation
Cable length (shielded) : 500M
Cable length (unshielded) : 300M
Number of output points: 6
Output voltage: 24V DC or 250V AC
Rated current: 2.0A
Rated current of common end: 10A
PPC905AE101 Current: 5A, 4s@10% duty cycle
Parameters and specifications
Power supply voltage: 24V DC
Rated current: 5A
Maximum current: 10A
Output power: There are 120W and 360W two versions, may vary depending on the configuration or model
Response frequency: 500Hz
Accuracy: ±0.05%FS
Operating temperature range: -25~70℃
Maximum output current: Maximum 5mA per channel
Size and weight
Size: Different sources give different size information. Some say it is 8.0 inches x 2.0 inches x 13.0 inches (20.3 cm x 5.1 cm x 33.0 cm), while others say it is 96mm x 48mm x 16mm.
Parameters and specifications
Model: SDSS-CON-4
Brand: ABB
Product Type: Programmable Logic Controller (PLC)
Switch quantity: up to 40 in 40 out, analog quantity up to 8 in 4 out
Working voltage: 24VDC
Voltage range: The voltage is 24V and the current range may be from 100A to 400A
Rated frequency: 60HZ
Operating temperature: -20°C to 60°C
Storage temperature: -40°C to 85°C
Humidity: 5% to 95% non-condensing
Size and weight
Size: There is a variety of size information, such as 210mm x 95mm x 25mm, 2859036mm, and 100*100mm.