The main function: to achieve extremely short switching time, usually within a few milliseconds to complete the power switch, to minimize the load equipment power failure time.
Starting mode: Support manual starting, low voltage starting and protection device starting and other starting modes.
Switching mode: including fast switching, first in-phase switching, delay switching and residual voltage switching.
Configuration: Supports configuration and operation through a human machine interface (HMI), integrating existing protection devices and circuit breakers.
Features: With four different configurations of switching modes, suitable for two to three circuit breaker configurations, support flexible communication protocols, with fault recording function and watchdog self-test function, integrated various security functions.
Voltage: Depending on the search results, the voltage of UAC389AE02 may vary depending on the application scenario. One message indicates that its voltage is 220V, while another indicates that its operating power supply is 24VDC.
Current: There is information that its current is 5A, but this data may not be comprehensive, because the current requirements in different application scenarios may be different.
Resistance: 5 Ohms.
Output frequency: 230.
Input power: In some application scenarios, the input power is AC 220-25A, 50Hz, but this may not be suitable for all cases.
Size and weight
Size: The exact size may vary by manufacturer or product model. One information states that its specification is 121212, but another information states that its specification is 5SHX2645L0004mm, which may not be accurate or applicable in all cases. There is also information indicating a size of 718062, but this data may be specific to a certain application scenario or product model.
Parameters and specifications
Rated operating voltage: Maximum 690V.
Current: 370A, there is also information indicating that the current range is 100-400A, but the specific may vary by model or configuration.
Power: 200kW.
Control power supply voltage: 100-250 V, 50/60 Hz.
Coil voltage: 100-250 V.
Number of starts per hour: The specific number is not directly given, but the PSTX series soft starters have the function of limiting the number of starts.
Size and weight
Size: Depending on the source, the size may vary. One saying is 1164930, another saying is 132mm105mm52mm.
Weight: 2KG
Brand & Manufacturer: The PM825 is a product from ABB.
Type: High performance Programmable logic Controller (PLC), part of ABB’s decentralized control system.
Processor: Based on the MC68360 microprocessor, running at 25MHz in 16-bit mode.
Memory: The system and user applications are stored in 1024 KB and 512 KB of FLASH, respectively, while 1024 KB of RAM is used for system and user application execution.
Electrical parameters:
Current: Depending on the application scenario, the current may vary, such as 5A or 1.56mA (specific parts), and there are claims that the current range is 100-400A.
Parameters and specifications
Voltage: Depending on the search results, the SPNPM22 voltage may have different specifications, such as DC20-50V, or the operating voltage is 24Vdc/120Vac, and there is information indicating a voltage of 24V. The voltage depends on the product model and application scenario.
Current: It is stated that the current range is 100-400A, but please note that this may need to be confirmed in conjunction with the specific product specification sheet.
Communication protocol: Support RS-485 bus, and adopt the standard MODBUS-RTU protocol, up to 200 devices can be mounted.
Output frequency: In a given situation, the output frequency may be 73 (but this may depend on the specific application scenario or configuration).
Parameters and specifications
Model: CS513 3BSE000435R1
Communication protocols: PROFIBUS DP, MODBUS RTU and ASCII are supported. PROFIBUS DP has a maximum data rate of 12 Mbps, while MODBUS RTU and ASCII have a maximum data rate of 115.2 kbps.
Communication mode: including Ethernet, serial communication interface (such as RS-232, RS-485) and a variety of industrial communication protocols.
Communication rate: Ethernet communication rate is 10/100Mbps.
Safety level: SIL 3.
Operating temperature: Depending on the source, it may vary, but generally in the range of -40 ° C to +70 ° C.
Voltage: There is talk of 24V, but please note that the specific voltage may vary by application.
Current: There is talk of 100-400A, but again, this needs to be determined according to the specific application scenario.
Size and weight
Dimensions: 225mm x 140mm x 70mm (according to a newer source).
Weight: about 2kg.
There are also references to 24Vdc/120Vac, but may refer to different applications or configurations.
Maximum current:
12A (according to some descriptions)
There are other accounts that mention 100-400A, but this may be an error or confusing information, as this does not match the other descriptions of 1TGE120028R0010.
Communication interface: RS232/RS485/CAN bus network function (CAN bus is an option)
Other specifications:
The upper computer is set up to operate and control the drive through the I/O port
