Communication speed: CH1 communication speed is supported and can be selected between 10 Mbps and 100 Mbps, these speeds are defined in the IEEE 802.3u 10/100 Base-Tx standard.
Power Supply: 24VDC power supply is received through the CEX bus and its current consumption is up to 250 mA. Under typical operating conditions, the power consumption is 3.8W and the maximum power consumption is 6W.
Communication protocol: Support PROFINET IO communication protocol, which is a widely used in the field of industrial automation Ethernet communication protocol, can achieve efficient and stable data transmission.
specification
Protection Class: According to EN60529 and IEC 529, the module is rated IP20 (but please note that information indicates IP30), which means that it has some dust and water resistance, but it is not suitable for harsh industrial environments.
Memory: 64 MB, of which 51.389 MB is available for applications and 4 MB flash memory for firmware storage
Power supply: 24 volts DC (19.2 volts -30 volts DC)
Power consumption: At +24 V, the power consumption is 210/360 mA and the power dissipation is up to 8.6 watts
specification
Communication interface: Has two RJ45 Ethernet ports and two RJ45 serial ports, one serial port with modem control signal, the other is isolated, mainly used to connect configuration tools
Support for CPU redundancy: including CPU, CEX-Bus, communication interface, and S800 I/O for higher availability
Interface extension: Has a CompactFlash interface and other possible expansion slots for adding more functional modules
Size and weight
Size:
Dimensions for independent use: width 130mm, height 130mm, depth 190mm (insert depth <250mm after all cables are connected)
19-inch rack mounting dimensions: Front panel 3 height units (U), 21 width units (HP), total width <26 width units (HP), including heat sink insertion depth <250mm
argument
Voltage: 24VDC (input voltage)
Current: May vary depending on the application, but generally has a wide current range
Operating voltage: +5V DC, ±10%, maximum 200mA
Temperature range: +0°C to +60°C
Humidity: Maximum relative humidity up to 95% (non-condensing)
specification
Input/Output (I/O) : Typically has 8 inputs and 6 outputs, but the I/O configuration is very flexible and can be scaled up to 142 I/O points
Program storage: Flash EPROM program memory that supports 8K steps
Data storage: 8K word data storage, can store a large number of program data and configuration information
Size and weight
Size: Different sources give different size information. One way to say it is 100 mm x 70 mm x 30 mm, another way is 250 x 190 x 180mm³. This may be due to differences between different models or versions.
Weight: Depending on the source, the weight may be 0.5 kg or 2KG.
argument
Component number: IS420UCSBH4A
Manufacturer: General Electric (GE)
Country of Manufacture: USA
Microprocessor: 600MHz Intel processor with 1066MHz Intel EP80579 microprocessor for gas turbine control system
Memory: 256 MB DDR2 SDRAM
Operating system: QNX Neutrino, a real-time multitasking operating system developed specifically for industrial applications that require high speed and reliability
specification
Series: Mark VIe series
Function: UCSB controller
Communication interface: On-board IONet (Industrial Ethernet) interface to support connection and communication with other devices and systems
Input/output channels: Multiple input and output channels are capable of monitoring multiple process variables and performing related actions
argument
Speed control function: used to control the speed of DC motor, to achieve accurate operation control.
Communication interface: May have Ethernet, RS485, USB and other communication interfaces, support a variety of communication protocols, easy to integrate with the existing system.
Power input: Redundant wide voltage (12~48V DC) input, typical operating voltage is 12V/24V/48V, full load power consumption is less than 7W.
specification
Structure: modular structure.
Input/Output: has 8 digital inputs and 6 digital outputs, as well as 4 analog inputs.
argument
Model: PFTL101A 0.5KN
Measuring range: 0.5KN (i.e. 500 Newtons)
Accuracy: High precision measurement, simulation accuracy up to ±0.03%
Interface: Analog input/output interface
Supply voltage: for example, +24V/2A (may vary by application)
specification
Type: load cell
Series: PFTL series
Versions: include standard PFTL 101A/B, as well as PFTL 101AE/BE for dry areas of paper machines and PFTL 101AER/BER for wet ends of paper machines
dimension
Size: 20011050mm in one description
weight
Weight: Approximately 2KG
series
Belonging to the PFTL series, the sensors are available in a variety of models and versions for different industrial environments and application needs
Power requirements: Usually operate in a specific power range, such as 24Vdc/120Vac, and may include other voltage options, refer to the product specification manual.
Communication interfaces: Interfaces that communicate with ABB systems, which may include Ethernet, serial interfaces, etc., for configuring and monitoring modules. In some cases, the HDMI interface may also be mentioned, but this may be a specific version or a false positive, and it is recommended to follow the official documentation.
specification
Product Type: Digital input/output module
Features: Provides programmable digital input and output functions for connecting and controlling external devices.
