VT1600S3X

Product Description

Product Parameters

• Power supply voltage: ±15V regulated supply (voltage regulators removed), ±22V to ±28V (voltage regulators installed).
• Power supply current: <200mA.
• Internal control voltage: 0 to ±10V.
• Output current: ±60mA, ±100mA.
• Dither current (typical): 340Hz/3mA pp.
• Relay coil voltage: 22V to 28V.
• Duty cycle: 1ms.
• Nominal coil resistance: 2000Ω.
• Ambient temperature range: 32°F to 122°F (0°C to 50°C).
• Storage temperature range: -4°F to 158°F (-20°C to 70°C).
• Weight (approx.): 0.33 lbs (0.15 kg).
• Interface type: Eurocard 100x160mm (DIN 41494).

Advantages and Characteristics

• High reliability: The VT1600S3X has a voltage stabilizer to provide clean voltage, ensuring consistent and stable performance. It also has an integrated PID control circuit that allows for tuning to achieve optimum performance, enhancing the reliability of position control and constant velocity circuits.
• Easy integration: With its compact size and Eurocard format, the VT1600S3X can be easily integrated into various automation systems. Its standardized interface and factory – assigned settings make the installation and commissioning process simple and convenient.
• Good performance: It can provide accurate control of motor speed, torque, and position, meeting the high – precision control requirements of different applications. The ability to adjust PID values through internal potentiometers accessible via the face plate allows for fine – tuning of performance according to specific application needs.

Application Fields and Application Cases

• Applicable industries and scenarios: The VT1600S3X is widely used in the manufacturing industry, such as in automated production lines for controlling the movement of robotic arms and conveyor belts. It is also used in the energy sector, for example, in the control systems of wind turbines to adjust the pitch and yaw of the blades. In addition, it is suitable for various automation control scenarios that require precise control of servo motors.

• Application case: In an automotive manufacturing plant, the VT1600S3X is used to control the servo motors of the robotic arms on the production line. It accurately controls the position and speed of the robotic arms, enabling them to perform tasks such as welding, painting, and assembling with high precision. As a result, the production efficiency and product quality are improved, and the defect rate is reduced.

Comparison with Similar Products

Selection Suggestions

• Compatibility: When selecting the VT1600S3X, make sure it is compatible with your existing motion controller and servo motor. Check the interface type, communication protocol, and voltage range to ensure seamless integration.
• Installation environment: Consider the installation environment, including temperature, humidity, and vibration. The VT1600S3X is suitable for use in an ambient temperature range of 0°C to 50°C, so make sure the installation location meets this requirement. Avoid installing it in environments with high humidity, strong vibration, or excessive dust.
• Budget: Although the VT1600S3X offers high – performance and reliability, it is necessary to consider your budget. Compare the prices of different suppliers to ensure you get the best value for money. However, do not sacrifice quality and performance for a lower price.

Precautions

• Safety regulations: When installing and using the VT1600S3X, follow the relevant safety regulations. Make sure to disconnect the power supply before installation and maintenance to avoid electric shock.
• Maintenance suggestions: Regularly check the connection status of the VT1600S3X to ensure that all connections are secure. Clean the surface of the card regularly to prevent dust and dirt from affecting its performance. Also, monitor the operating temperature of the card to ensure it does not exceed the specified range. If any abnormal conditions are found, such as overheating or unusual noise, stop using the card immediately and contact a professional for maintenance.